Table of Contents
Advertisement
™
Mounting bracket;
Figure 2-1. Universal Mounting Kit Parts
Selecting an Operating Location
The Switch should be located in a secure or limited-access place to control use
of the Switch front panel controls, and to ensure that cable connections are not
compromised. The operating location you select for the Switch must meet
cooling air requirements and power requirements.
Cooling Air Requirements
Cooling air is drawn into the Switch chassis by the power supply fan and by
two other fans mounted on the rear of the chassis; the air is expelled through
vents in the front of the chassis. The combined air flow through the Switch is
75 cubic feet per minute (cfpm), and nominal bulk flow of 15 cfpm.
1
2
š
Extender bracket;
CAUTION: Do not block the front or rear air vents. The Switch must have free
access to ambient air for cooling.
4
3
SHR-1383
›
œ
Slide bracket;
Hardware bag
Installing the Switch 2-3
Advertisement
Table of Contents
