Figure 2-4. Connecting An Extender Bracket To A Mounting Bracket; Figure 2-5. Installing The Mounting Brackets In A Retma 42U Or Compaq - Compaq AA-RHBYA-TE 135267-001 User Manual

2-8 StorageWorks Fibre Channel Storage Switch User's Guide

Figure 2-4. Connecting an Extender Bracket to a Mounting Bracket

4. Insert an alignment washer into each of the eight rail holes marked M
(Figure 2–5).

Figure 2-5. Installing the Mounting Brackets in a RETMA 42U or Compaq

Classic Rack
5. Attach each mounting bracket to the rack rails by inserting SEMS
10-32x5/8 screws through the alignment washers into the bracket holes;
tighten all the screws.
6. Tighten the four screws that connect the extender brackets to the
mounting brackets.
SHR-1381
SHR-1382