Door Handle Assembly - Quadra-Fire 31I-ACC Owner's Manual

3100-I ACC
E. Door Handle Assembly
1. Install washer on door handle shaft.
2. Slide door handle through door.
3. Install second washer(s) as shown in Figure 24.1.
4. Install key in groove.
5. Align groove in latch cam with key; slide latch cam over
shaft
6. Install locknut but do not overtighten, the handle needs
to move smoothly.
7. Install handle turning in a counter-clockwise motion to
desired location on door handle rod. Figure 24.2.
CAUTION! Do not overtighten lock nut. The door handle
needs to move smoothly.
Door Cross Section
(example)
Latch Cam
Locknut
Spacing
Washers
Figure 24.1 - Door Handle for Arched Door
Door Cross
Latch Cam
Section
Locknut
Spacing
Washers
Figure 24.2 - Door Handle for Arched Door
24
Spring
Handle
Door Handle
Square Key
Door Handle Shaft
Square Key
Fiber Handle
7044-226C February 25, 2016