Rear Panel Connections - Sherwood CDC-5506 Operating Instructions Manual

Rear Panel Connections

• Do not plug the AC input cord into the AC outlet when making connections.
• Be sure to connect the white plugs to the L(Left) jacks and the red plugs to the R (Right) jacks when making
connections.
• Refer to the connecting diagram in the operating instructions of your amplifier/receiver
5
DIGITAL DIGI LINK
OPT
1.
CONNECTING ANALOG AUDIO OUTS
• Connect the ANALOG L and R jacks to the CD IN jacks of
your amplifier/receiver.
2.
CONNECTING DIGILINK
• Connect this jack to the DIGILINK jack of Sherwood system
amplifier/receiver to control this unit remotely by DIGILINK II
or III system. (For details, refer to the operating instructions of
Sherwood amplifier/receiver.)
■Note :
• The DIGILINK operation may not work on some Sherwood
components.
3.
CONNECTING OPTICAL DIGITAL OUT
• Connect this jack to the OPTICAL DIGITAL IN jack of your
amplifier/receiver to enjoy digital sound.
■Notes :
• It is not recommended to record digital audio signals with
digital audio connection between this unit and MD or CD
recorder, etc.. When recording the sounds played on this unit,
record them through the ANALOG AUDIO OUT jacks.
• Some of the commercially available optical fiber cords cannot be used for the equipment. If there is an optical fiber cord which
cannot be connected to your equipment, consult your dealer or nearest service organization.
4.
AC INPUT CORD
• Plug the cord into a wall AC outlet.
5.
TERMINAL FOR UPGRADE
• This terminal may be used in the future to update the operating software, etc.
■Note :
• Programming for upgrade requires specialized programming knowledge and for that reason we recommend that it only be
done by qualified installers.
CDC-5506
5DISC CD CHANGER
AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
ANALOG
POWER SOURCE 120V 60Hz
POWER CONSUMPTION 23 W
L DESIGNED IN USA
MADE IN CHINA
R
SN.
5
4
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions : (1)This device may not cause harmful interference, and (2)This device must
accept any interference received, including interference that may cause undesired operation.
WARNING : SHOCK HAZARD-DO NOT OPEN.
This product complies with DHHS rules 21 CFR Subchapter
J Part 1040.10 at date of manufacture.
Manufactured : DWE
ANALOG
L
R
Sherwood amplifier/receiver
DIGI LINK
DIGITAL
OPT
Amplifier/receiver
CD IN
DIGILINK
Amplifier/receiver
OPTICAL IN