Rear Panel Connections - Sherwood Newcastle CD-980 Operating Instructions Manual

Rear Panel Connections

Do not plug the AC input cord into the AC outlet when making connections.
Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections.
I OUTPUT
Power Amplifier
When reducing signal path by connecting power amplifier to
variable output of this unit directly, you can listen to high
quality music.
It is possible to control volume with Headphone Level
Control Knob.
In general, fixed output is connected to CD input in amplifier
or receiver.
I DIGI LINK
Connect this jack to the DIGI LINK jack of
Sherwood amplifier or receiver bearing the
DIGI LINK III or II mark to control this unit
remotely by DIGI LINK system.
CD input in Amplifier
or Receiver
Dolby noise reduction and HX Pro headroom
extension manufactured under license from Dolby
Laboratories Licensing Corporation. HX Pro
originated by Bang & Olufsen. "Dolby", the
double-D symbol and "HX PRO" are trademarks
of Dolby Labor atories Licensing Corporation.
OPTICAL COAXIAL
DIGITAL OUTPUT
Amplifier or Receiver by
SHERWOOD
I AC INPUT CORD
Plug this cord into a wall AC
outlet.
"SHOCK HAZARD-DO NOT OPEN"
"RISQUE DE CHOC-ELECTRIQUE-NE PAS OUVRIR"
NEWCASTLE
MODEL NO. CD-980 C A U T I O N
R I S K O F E L E C T R I C S H O C K
COMPACT DISC PLAYER
D O N O T O P E N
MADE IN KOREA
DESIGNED IN USA
E85649
T h i s d e v i c e c o m p l i e s w i t h P a r t 1 5 o f t h e F C C R u l e s .
29Z3
O p e r a t i o n i s s u b j e c t t o t h e f o l l o w i n g t w o c o n d i t i o n s :
LISTED
AUDIO EQUIPMENT ( 1 ) T h i s d e v i c e m a y n o t c a u s e h a r m f u l i n t e r f e r e n c e , a n d
C C
( 2 ) t h i s d e v i c e m u s t a c c e p t a n y i n t e r f e r e n c e r e c e i v e d ,
R R
i n c l u d i n g i n t e r f e r e n c e t h a t m a y c a u s e u n d e s i r e d o p e r a t i o n .
SER. NO.
I DIGITAL OUTPUT
OPTICAL COAXIAL
DIGITAL OUTPUT
Digital output should be connected to digital
input of amplifier or receiver to enjoy live
digital sound.
You can record digital sound by connecting
digital input of Mini Disc Recorder to these
jacks.
When making the COAXIAL DIGITAL
connection. be sure to use 75Ω COAXIAL
cord. not a conventional AUDIO cord.
When making OPTICAL DIGITAL
connection, do it after removing tap.
Insert tap when not using the OPTICAL
DIGITAL jack.
4
AC INPUT
120V~60Hz
13W
COAXIAL Digital Input in
Amplifier or Receiver
OPTICAL Digital Input in
Amplifier or Receiver