Operating instructions with spare parts list ESG Plus
orbitalum tools gmbh
1
Safety notes
The Tungsten Grinder (called ESG Plus in this document) is state of the art.
Any other use than that described in these instructions can lead to injury to the
user or other persons. In addition the device or other objects can be damaged.
Therefore:
•
Always ensure that the device is in good working condition, and always
comply with these notes on safety.
•
Keep the complete documentation close by the device.
•
All regulations generally valid for the prevention of accidents must be
observed.
1.1
Proper use
The ESG Plus is intended only to be used to process welding electrodes.
1.2
Safety regulations
•
Only use the dimensions and materials quoted in these instructions. Other
materials should only be used after consulting Orbitalum Tools customer
service department.
•
Only use authentic Orbitalum Tools spare parts and materials.
•
Check the ESG Plus daily for any externally visible damage or defects.
Have any damage or defects repaired immediately.
•
Work on the electrical equipment should only be carried out by a qualified
electrician.
•
Only operate the ESG Plus if the electrical protective devices function.
•
The tapped holes at the ESG Plus must always be free of dust, clean if
necessary.
•
Pull out the power plug before carrying out repair and maintenance work.
1.3
Work safely
"Play your part in ensuring safety at work."
•
Report any changes in operating performance to the responsible person
immediately.
•
Carry out all work with an awareness of safety.
(12.07) MT_ESG Plus_BA_04_790052774_07.doc
1 Safety notes
3