Operation; Switching On The Esg Plus; Grinding The Electrodes - Orbitalum ESG Plus Operating Instructions With Spare Parts List

Operating instructions with spare parts list ESG Plus
1
DANGER
Note
Important
orbitalum tools gmbh
6

Operation

6.1

Switching on the ESG Plus

1. Connect the ESG Plus (consider main voltage).
2. Press the ON/OFF switch (1).
The ESG Plus starts.
6.2

Grinding the electrodes

Hot dust!
Danger of injury to eyes!
Do not use thorium-coated tungsten electrodes without a suitable suction
devices or a suitable breathing mask.
Only work with safety goggles.
Always wear a breather mask.
Do not exert too much pressure on the grinding wheel, since otherwise the
service life of the diamond wheel is shortened.
The strength of the contact pressure, but even rotation of the electrode around
its own axle and a small contact pressure of the electrode to the grinding
produce a high sharpening achievement.
Use a rough diamond wheel during larger sharpening achievement.
(12.07) MT_ESG Plus_BA_04_790052774_07.doc
6 Operation
11