Assembly Of The Double-Decker Kit Esg - Orbitalum ESG Plus Operating Instructions With Spare Parts List

Operating instructions with spare parts list ESG Plus
Disassembly of the
ESG Plus head
orbitalum tools gmbh
7 Assembly of the Double-decker Kit
2
ESG
The Double-Decker Kit ESG
but is obtainable as extra accessory (see chapter 2.2.7, p. 7).
1. Dismantle and remove the cylinder head screw with collar (M4x15) at the
ESG Plus grinding head. Do not remove the arrest nut (1).
2. Remove the ESG Plus grinding head.
3. Slide a 2.4 mm pin through cross hole and motor shaft (rotation of the
grinding wheel is prevented).
4. Loosen and remove the grinding wheel screw (cylinder head screw with
washer, M4x6).
(12.07) MT_ESG Plus_BA_04_790052774_07.doc

7 Assembly of the Double-decker Kit ESG2

2
is not included in the standard scope of supply
1
15