What To Do If; Fault Elimination; Servicing/Customer Service - Orbitalum ESG Plus Operating Instructions With Spare Parts List

9 What to do if...?

Fault
Motor of the ESG Plus does not
run.
The ESG Plus head does not
stick.
The diamond wheel does not
rotate.
Unbalance of the grinding wheel
when started up.
18
9 What to do if...?
9.1

Fault elimination

Possible cause
Power cable defective.
Motor defective.
ESG Plus head is not correctly
fastened to the motor flange.
No tension.
Engine defectively.
Grinding wheel mounted
incorrectly.
9.2

Servicing/customer service

For ordering spare parts, see the spare parts list, chapter 10, p. 19.
For the resolution of faults, please contact your branch office directly.
You can also contact directly our customer service address in Singen:
Orbitalum Tools GmbH
Freibühlstraße 19, D-78224 Singen
Phone: +49 (0) 77 31 / 792-764
Fax: +49 (0) 77 31 / 792-500
Please give the following details:
•
Machine type: ESG Plus
•
Machine number: (see identification plate)
(12.07) MT_ESG Plus_BA_04_790052774_07.doc
Operating instructions with spare parts list ESG Plus
Remedy
Replace the power cable.
Replace the motor.
Tighten the Torx screw.
Examine tension.
Replace the motor.
Tighten or replace the
grinding wheel immediately.
orbitalum tools gmbh