Disposal; Manufacturer's Warranty - Dx Tools - Hilti DX 460 Operating Instructions Manual

Fault
Damaged nail head
en

10. Disposal

Most of the materials from which Hilti power actuated tools are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back your old powder actuated tools for recycling. Please ask your Hilti customer service department or
Hilti sales representative for further information.
Should you wish to return the power actuated tool yourself to a disposal facility for recycling, proceed as follows:
Dismantle the tools as far as possible without the need for special tools.
Separate the individual parts as follows:
Part / assembly
Toolbox
Outer casing
Screws, small parts
Used cartridge strip
11. Manufacturer's warranty – DX tools
Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts, or other products of equiv-
alent quality, may be used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement as
a result of normal wear and tear are not covered by this
warranty.
Additional claims are excluded, unless stringent nation-
al rules prohibit such exclusion. In particular, Hilti is
not obligated for direct, indirect, incidental or conse-
34
Printed: 08.07.2013 | Doc-Nr: PUB / 5129603 / 000 / 01
Cause
■ Driving power too high
■ Wrong piston used
■ Worn-out piston
Main material
Plastic
Plastic / synthetic rubber
Steel
Plastic / steel
Possible remedies
■ Reduce power setting
■ Use lighter cartridge
■ Check nail/piston combination
■ Change piston
Recycling
Plastics recycling
Plastics recycling
Scrap metal
According to local regulations
quential damages, losses or expenses in connection
with, or by reason of, the use of, or inability to use the
tool for any purpose. Implied warranties of mer-
chantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.