Message Playback; Options During Playback - AT&T CL84250 User Manual

Dect 6.0 corded/cordless telephone/answering system with caller id/call waiting
Hide thumbs Also See for CL84250:
Table of Contents

Advertisement

Answering system

Message playback

If you have new messages,
and only the new messages are played (oldest first). If there are no new
messages, the system plays back all the messages (oldest first).
When playback begins, the total number of messages is announced. Before
each message, you hear the day and time of the recording. If the date and
time is not set, you hear, "Time and date not set," before playback. After the
last message, you hear, "End of messages." If the recording time is less than
three minutes, you hear, "Less than three minutes to record," (see Message
capacity on page 60).
To listen to messages at the telephone base:
When the telephone base is in idle mode, press
/PLAY/
STOP
-OR-
Press MENU/
SELECT
messages, the messages will play automatically. If there are
new and old messages, press q/CID or p/DIR to highlight
Play new msgs or Play old msgs and press
To listen to messages on a cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press
/SELECT again to select >Play messages.
MENU
3. If there are only new or old messages, they will play
automatically. If there are new and old messages, press qCID
or pDIR to select >Play new msgs or >Play old msgs then
press
SELECT. If there are only new messages, they will
MENU/
play automatically.
The system announces the number of messages, then begins playback.
The message sequence is shown on the cordless handset screen or the
telephone base screen. If there are no recorded messages, the cordless
handset or the telephone base screen shows No message with voice prompt
"You have no messages."

Options during playback

When a message is playing, you can adjust the playback volume, skip, repeat,
or delete the message. You can adjust the audio quality of message playback
by pressing EQ
When messages are playing on the telephone base:
Press pq/VOLUME button to adjust the message playback volume.
S�IP to skip to the next message.
Press
/
/PLAY/STOP on the telephone base flashes
.
twice. If there are only new or old
on the cordless handset (see Equalizer on page 34).
SELECT.
MENU/
SELECT
62
PLAYING MESSAGE
Msg#[1/2]
10:21
10/15
AM
Play new msgs
>
Play old msgs
3 New messages
to
ANS ON
3-Delete 5-Stop
4-Repeat 6-Skip
ANS ON
6:30
AM
MSG#
1/3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl84100Cl84200Cl84300

Table of Contents