Motorola CM300TM User Manual page 37

5 Your dealer/programmer can preprogram your
radio in one of three ways to enter your
access code to the repeater.
Immediate Auto – automatically sends the
access code.
Delayed Auto – your radio will transmit the
access code upon a PTT button press.
Manual - Enter your access code using the
DTMF microphone keypad and press the PTT
button.
6 When you hear a dial tone:
XXXXXXX
Enter the phone num-
ber using the DTMF
microphone keypad.
The number will scroll
to the left,
– or –
G H
XXXXXXXX
or to select a
number from the
phone list.
Note: Only the first 8 digits are displayed.
– or –
a. Press and release the preprogrammed
Speed Dial button.
b. Press the key (0 to 9) corresponding to
the number you want to call.
Note: To redial the last number dialed (if
not using Speed Dial), press and
release the PTT button immediately
after the access code is sent. The
radio sends the last number dialed.
– or –
If you entered your access code
using the DTMF keypad, press
once to access the last number
dialed; then press and release the
PTT button.
7 Press and release the PTT button, if required
for your radio.
8 Hold the radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Press and hold the PTT but-
ton to talk. Release the PTT button when the
other party wants to talk, both parties will
need to speak in turn.
G
35
English