Getting Started; Turn The Radio On Or Off; Adjust The Volume; Select A Radio Channel - Motorola CM300TM User Manual

GETTING STARTED

TURN THE RADIO ON OR OFF

ON
Rotate the On/Off/ Rotate the On/Off/
Volume Control knob Volume Control knob
clockwise. If power-up counterclockwise until
is successful, you will you hear a click and both
hear the Self-Test Pass the display and LED indi-
Tone ( ) and cators turn off.
see the green LED
indicator and display
icons light momentarily.
If the radio fails to
power up, you will hear
the Self Test Fail Tone
( ). The radio
will need to be returned
for re-programming.

ADJUST THE VOLUME

Turn the On/Off/Volume Control knob
clockwise to increase the volume, or
counterclockwise to decrease the volume.
On/Off/Volume
– or –
Control Knob
Note: Your dealer/programmer can
preprogram one of the programmable
PERS4
buttons to Volume Set.
1 Hold down the Volume Set
page 13).
OFF
• You will hear a continuous tone.
2 Turn the On/Off/Volume Control knob to the
desired volume level.
3 Release the Volume Set button.

SELECT A RADIO CHANNEL

Up to a total of 32 channels can be
programmed into your radio.
Select a Channel
G H
or
button
to select the desired channel.
(see
17
English