Table of Contents
Advertisement
06_Scan.fm Page 50 Wednesday, August 3, 2005 3:26 PM
DELETING A NUISANCE CHANNEL/
TALKGROUP (SYSTEM SCAN
OPERATION ONLY)
If a talkgroup or channel continually generates
unwanted calls (a "nuisance" channel), use the
preprogrammed Scan button to temporarily
delete the talkgroup or channel from the Scan
list.
To temporarily delete the channel/
talkgroup:
1 While the radio's receiving activity is on the
nuisance channel, press and hold the Scan
button until you hear a high-pitched tone (valid
key press).
2 Release the Scan button. The nuisance
channel has been temporarily deleted from
your Scan list.
Restoring a Channel/Talkgroup Back to the
Scan List
To restore a previously deleted talkgroup or
channel back to the Scan list, restart the scan
operation or turn your radio off and on again.
50
English
All manuals and user guides at all-guides.com
EDITING A SCAN LIST (SYSTEM
SCAN OPERATION ONLY)
One Scan list is assigned to each of the 16
positions on the Zone/Channel Selector knob.
Each Scan list can contain up to 16 talkgroups
and/or channels. The same talkgroup or
channel can be included in several Scan lists,
and the same Scan list can be assigned to
several Zone/Channel Selector positions.
When you edit a Scan list, you can either add,
delete, or prioritize talkgroups or channels:
Position 2
1
3
5
6
Your radio cannot receive any calls while you
are editing a scan list. K displays while you
are in edit mode.
Note:
In Conventional operation only, even if
there is activity on a non-priority channel,
your radio automatically switches to an
active priority channel and indicates the
activity with a short tone.
Position 2
1
2
3
11
Advertisement
Table of Contents
