Motorola CLS1110 User Manual page 32

Programming Call Tones and VibraCall
Your radio can transmit call tones to other radios in your group so you can alert them
that you are about to talk. Your radio is programmed at the factory with call tones
turned off (set to 0), but you can change this setting to choose a distinctive call tone.
The VibraCall
vibrate briefly when it receives if you have not transmitted or received in the last
30 seconds. Select call tone 4 to turn VibraCall
®
VibraCall is on.
1. In programming mode, press
2. Press [ or ] to hear and select the call tone. Select call tone 4
for VibraCall
3. Press and hold Push to Talk to exit programming mode, or press
to continue programming.
S
To transmit your call tone, press B on the side of the radio.
30
®
feature is an additional call tone option that makes the CLS1410 radio
®
(CLS1410 only).
®
(CLS1410 only)
®
on. i displays on the radio when
until E displays.
S