Troubleshooting - Motorola CLS1110 User Manual

Troubleshooting

Symptom
No Power
Message not
transmitted
Hearing other
noises or
conversation on
a channel
Poor audio
quality
Try This:
Recharge or replace Li Ion battery.
Reposition or replace Alkaline batteries.
Make sure Push to Talk is completely pressed while
transmitting.
Recharge, replace, and/or reposition batteries.
Verify the transmit light is illuminated while speaking.
Verify Channel, Frequency, and Code settings are correct.
Frequency may be in use. Change on all radios if possible (see
page 28 and 29).
Bandwidth does not match. For optimal audio quality when
communicating with _Series radios, the bandwidth of other
radios should be set to 12.5 kHz, if possible.
35