Dynamic Range; Dvi; Hdmi; Language - Sharp TL-M5200 Operation Manual

n Dynamic Range
This function allows you to select the black level
range (the range between the minimum and
maximum brightness) for the DVI or HDMI input
signals.
Input Selectable
signal items

DVI

Standard Reproduces black level range
normally.
Enhanced Reproduces black level range
more extensively.

HDMI

Auto Looks at the AVI packet
information of the HDMI
signal and automatically
selects the dynamic range.
Standard Reproduces black level range
normally.
Enhanced Reproduces black level range
more extensively.
Note
• This function is available under the following conditions.
(See "Signal Type" on page 40.)
1) When the input mode is "DVI":
"Signal Type" is set to "D. PC RGB" or "D. VIDEO
RGB".
2) When the input mode is "HDMI":
"Signal Type" is set to "Auto" and input signals are
recognized as RGB. Or, "Signal Type" is set to "RGB".
n Selecting the on-screen display

language

(Language)
The monitor can switch the on-screen display
language among 7 languages.
English
Deutsch
Español
Nederlands
Français
Italiano
Description
n HDMI (High-Definition Multimedia
Interface) setup
This function allows you to select the Resize mode
and audio of the HDMI input signal.
HDMI Setup Selectable
items items
Auto View Enable/
Disable
Audio Select Digital/
Analog
Note
• Refer to your external equipment operation manual for
the above settings.
• When connecting a DVI-HDMI conversion adaptor/cable
to the HDMI terminal, the image may not come in clearly.
n Setting the resize mode

(Resize)

This function allows you to modify or customize the
Resize mode to enhance the input image.
Note
• For details of the Resize mode, see pages 24 and 25.
• You can also press RESIZE on the remote control to set
the resize mode. (See page 24.)
n Timer
You can set the time to switch the monitor on and
off.
1
Press MENU and press ◄/► to select "Option".
2
Press ▲/▼ to select "Timer", and press ENTER.

Clock

Sets the current day and time.
1
Press ▲/▼ to select "Clock", and press ENTER.
2
Press ◄/► to select items, and press ▲/▼ to
change the setting.
3
Press ENTER.
"Clock" setting becomes effective.
Menu operations
Description
Set whether or not
to use Resize mode
based on signal
recognition, including
an HDMI signal.
Select "Digital" for
audio signal via the
HDMI terminal. Select
"Analog" for audio
signal via the audio
input terminal.
41