Setup Menu; Ecology; Note; Password - Sharp TL-M5200 Operation Manual

Menu operations
n Ecology
When set to "Yes", The monitor activates the
following power saving mode.
• "OPC" set to "On" (Page 32)
• "Standby Mode" set to "Mode2" (Page 37)
• "No Operation Off" set to "3 Hours" (Page 33)
• "Power Management" set to "Mode1" (Page 33)

Note

• When selecting "Yes" for "Ecology", the settings related to
"Ecology" ("OPC", "Standby Mode", "No Operation Off",
and "Power Management") will be lost. Once you have
selected "Yes" for "Ecology", these settings will not return
to the previous setting by selecting "No". To restore these
settings, each setting must be changed individually.
34

Setup menu

Setup

Password

Keylock
Set Inputs
Input Label
Position
Fine Sync
Standby Mode
Auto Restart
RS-232C
DHCP Client
TCP/IP
Status
All Reset
n Setting a password
(Password)
If you do not want others to change the setting
for the "Setup" menu, set a password.
1
Select "Password", then press ENTER.
• The screen for entering the password appears.
MENU [Setup---Password]
Enter your new password.
Use 4 digits.
Old Password
New Password
Reconfirm
2
Press ▲/▼ to set the first digit in "New
Password", then press ►.
3
Enter the remaining 3 digits, then press ENTER.
• To return to the previous digit, press ◄.
4
Enter the same password in "Reconfirm", then
press ENTER.
• The status for "Password" changes to
" (enable)".
Note
• Once the password is set, you must enter the password
to change the "Setup" menu settings.
Option
----
---
----