Using The Remote Control As The Wireless Computer Mouse - Sharp TL-M5200 Operation Manual

Operating with the Remote Control

Using the remote control as the wireless computer mouse

The USB remote receiver (optional, AN-MR2) makes it possible to operate the monitor with the remote
control. For details, see the operation manual of the receiver.
The mouse pointer can be operated in the following way after it is connected.
When moving the cursor:
Press Adjustment/MOUSE (▲/▼/◄/►).
When left-clicking:
Press L-CLICK.
When right-clicking:
Press R-CLICK.
When your computer supports only a one-click
mouse (such as Macintosh):
Press L-CLICK or R-CLICK.
L-CLICK and R-CLICK have common function.
When using [Page Up] or [Page Down]:
Same as the [Page Up] and [Page Down] keys on a
computer keyboard.
Press PAGE UP or PAGE DOWN.
Note
• This function only works with the Microsoft
following operation systems that do not support USB.
– Versions earlier than Windows
– Versions earlier than Windows
– Versions earlier than Mac OS
• You cannot use this function when displaying the menu screen.
• Confirm that the computer recognizes the USB remote receiver connection.
28
To Monitor To Computer
RGB, DVI or HDMI cable
(commercially available)
® ®
Windows OS and Mac OS
®
95
®
NT4.0
®
8.5
Computer
USB remote receiver
To USB terminal
(optional, AN-MR2)
®
. However, this function does not work with the
PAGE UP/
PAGE DOWN buttons
Adjustment/MOUSE
buttons ( / / / )
R-CLICK button
L-CLICK button