Setup Menu - Sharp PN-Y555 Operation Manual

SETUP menu

Function
DATE/TIME SETTING
ID SETTING ID NO.SETTING
ID NO. SETTING
(ONCE)
ID NO. SETTING
(SUBSEQUENT)
MULTI ENLARGE
ENLARGE MODE
IMAGE POSITION
(M x N)
BEZEL ADJUST
ENLARGE/
IMAGE POSITION
SETTING
THERMAL SENSOR SETTING
ADJUSTMENT MONITOR
LOCK BUTTONS
REMOTE
CONTROL
Others
Function
VOLUME
MUTE
INFORMATION MODEL
SERIAL NO
TEMPERATURE SENSOR
TEMPERATURE ACQUISITION
CAUSE OF LAST STANDBY MODE
LAN SETUP USERNAME
PASSWORD
TIPS
• Some menu setting items do not have a command. Set with the remote control during installation.
Command Direction Parameter
DATE WR AABBCCDDEE
IDST W 0-25
R
IDSL W 1-25
0
IDLK W 1-25
0
ENLG WR 0-1
EMHV WR 11-55
EPHV WR 11-55
BZCO WR 0-1
ESHV WR XXYY
STDR WR 0-1
ALCM WR 0-1, 3
ALCR WR 0-3
Command Direction Parameter
VOLM WR 0-31
MUTE WR 0-1
INF1 R
SRNO R
DSTA R
ERRT R
STCA W 0
R
USER WR XXXXXXXX
PASS WR XXXXXXXX
Controlling the Monitor with a PC (RS-232C)
Reply
AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Hour, EE: Minute
Sets the monitor's ID number. ("0" means "no ID number".)
0-25 Returns the monitor's ID number.
Sets a monitor ID number.
This ID number is only effective for the command immediately after this
command.
Clears the ID number if one has been designated.
Sets a monitor ID number.
This ID number is effective for the next and all subsequent commands after this
command.
Clears the ID number if one has been designated.
0-1 0: OFF, 1: ON
11-55 1 x 1 (OFF) to 5 x 5 ("m x n" is expressed as "mn", where m and n are the
numbers of monitors specified for the longest direction and the shortest direction
respectively.)
11-55 Specifies values in the order of IMAGE POSITION IN LONGEST/ SHORTEST
DIRECTION.
0-1 0: OFF, 1: ON
XXYY XX: ENLARGE MODE (Same as EMHV), YY: IMAGE POSITION (Same as
EPHV)
0-1 0: LANDSCAPE, 1: PORTRAIT
0-1, 3 0: UNLOCKED, 1: LOCK ALL, 3: LOCK EXCEPT POWER
0-3 0: UNLOCKED, 1: LOCK ALL, 2: LOCK EXCEPT VOLUME,
3: LOCK EXCEPT POWER
Reply
0-31
0-1 0: OFF, 1: ON
Value
Value
0 Internal temperature normal
1 Internal temperature abnormal has occurred and the monitor is in standby mode
2 Internal temperature abnormal occurred (To delete the information of temperature
abnormal, turn off the main power.)
3 Internal temperature abnormal has occurred and backlight brightness is dimmed
4 Temperature sensor abnormal
Value Returns the temperature at the temperature sensors in the following format.
[Sensor 1]
Initialization
0 No detectable error has occurred
1 Standby mode by POWER button
3 Standby mode by RS-232C or LAN
4 Input signal waiting mode by No Signal
6 Standby mode by abnormal temperature
8 Standby mode by SCHEDULE setting
20 Standby mode by OFF IF NO OPERATION setting
XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
Control/Response contents
Control/Response contents
*
○
*
○
-
○
37
E