Table of Contents
Advertisement
Starting self-clean cycle
A self-cleaning oven cleans itself with high
temperatures (well above cooking temperatures)
which eliminate soil completely or reduce it to a
fine powdered ash you can whisk away with damp
cloth. If you are planning to use the oven directly
after a self-clean cycle remember to allow time for
the oven to cool down and the oven door to unlock.
This normally takes about one hour.
Setting the controls for a Self-Clean cycle
The clean feature provides 3 different choices for
self-cleaning the upper oven. Set the clean for lite
(2 hrs), med (3 hrs) or heavy soils (4 hrs). The
example below shows setting the upper oven for
self-clean to begin immediately using a medium (3
hour) setting:
Example
Step
1. Porcelain racks can stay in the oven during
the self-clean cycle but it is recommended to
remove them.
2. Be sure the clock is set with the correct time of
day and the oven door is closed.
3. Select oven by pressing UPPER
OVEN
4. Press CLEAN
5. Select MED or
select lite or heavy
6. Press START
7. As soon as the control is set, the motor driven
oven door lock will begin to close automatically.
Once the door has been locked the "DOOR
" indicator light will stop flashing and remain on.
Note: When the oven is set to run a self-clean
cycle, the motor door lock will begin locking the
oven door. Do not open the oven door while
the lock motor is running or when any locking
indicators or displays are showing. The oven door
is completely locked in about 15 seconds.
NOTE
You may press CANCEL any time during the
cleaning process. After cancelling the self-clean
cycle, do not attempt to open the oven door until
the DOOR lock icon turns off.
Setting Self-Clean Cycle
To set the controls for a delayed Self-
Cleaning cycle:
The example below shows setting the upper oven
for a medium (3 hour) self-clean to end at 6:00
o'clock:
Step
Follow steps 1 to 6 under setting controls for a
self-clean cycle, then:
7. Press COOK OPTIONS
8. Press END TIME
9. Enter time of day needed for the
end of the cycle (example for "6:00")
10. Press START
Press
When the Self-Clean Cycle is
Completed:
1. The time of day and "DOOR
2. The display will show an "Hot" message while
the oven is still too hot to open door.
UPPER
3. Once the oven has cooled down for 1 HOUR,
OVEN
and the "DOOR
displayed, the oven door can then be opened.
• During the self-cleaning cycle, the outside of the
appliance can become very hot to the touch. DO
NOT leave small children unattended near the
appliance; they may be burned if they touch the
hot oven door surfaces.
• Do not force the oven door open when self-
clean is active. This can damage the automatic
door-locking system. Use caution when open-
ing the door after self-clean cycle is complete;
the oven may still be very hot.
• The oven bake and broil elements may appear
to have cooled after they have been turned off.
The elements may still be hot and burns may
occur if these elements are touched before
they have cooled.
• To avoid possible burns, use care when open-
ing the oven door after the self-cleaning cycle.
Stand to the side of the oven when opening the
door to allow hot steam and air to escape.
Example
Press
6 0 0
" will remain ON.
" icon is no longer
45
Advertisement
Table of Contents
