Operation; Turning Power On And Off; Changing Channels; Adjusting The Volume - Motorola DCH200 User Manual

2 OPERATION

2 OPERATION

Turning Power On and Off

Press
receiver on or off (standby). When using the remote
control, be sure it is in cable mode by pressing
before pressing

Changing Channels

You can change channels in three ways:
•
Press channel + or – on the remote control to step
through the channel selection.
•
Enter the number of the channel you wish to view
using the number keys on the remote control.
•
Select the channel in the interactive program guide.

Adjusting the Volume

Press volume + or – on the remote control to adjust the
volume. When you adjust the volume, the volume scale is
displayed on the screen. Press mute on the remote
control to toggle the sound on and off.
For best audio quality, use the remote control to set the
DCH receiver to approximately three quarters of the
maximum volume level and then adjust the audio levels on
external devices such as your TV or A/V receiver.

Interactive Program Guide

The interactive program guide displays information about
TV programs and enables you to access features such as
Parental Control or Pay-Per-View. Interactive program
guides can vary with each cable service provider. Refer to
on the remote control to turn the DCH
POWER
POWER
.
4
CABLE