Table of Contents
Advertisement
TROUBLE SHOOTING GUIDE
Problem
No power
Battery power dies shortly after
charging.
Transceiver cannot scan
All band noisy after programmed
No sound after using earphone.
for a while
Communication distance
becomes short, and Low
sensitivity
Cannot talk or hear other
members in your group
50
Corrective Action
A.The battery may be exhausting. Recharge or replace the battery.
B.The battery may not be installed correctly. Remove the battery
and install it again.
C.The power switch is broken; send it to local dealers to repair.
D.Battery touch is broken; send it to local dealers to repair.
The battery life is finished. Replace the battery pack with a new one.
The channels are not in scan list. (Professionals set it.)
Turn on squelch when programmed. Non-professionals are advised
not rammed to adjust this function.
Earphone jack is broken. Please contact with local dealers to repair.
A.Check whether the antenna is in good conduction and the antenna
base do not come adrift.
B.Antenna connector is broken or not or with sundries. Whether it
has set in low power output. (Please contact with local dealers to
repair.)
A.Different frequency or channel, please change it.
B.Different CTCSS/DCS/DTMF, please reset it.
C.Out of communication range.
Advertisement
Table of Contents
