AnyTone AT-3318UV Instruction Manual page 16

BATTERY INFORMATION
NOTE: When charging a powered-on transceiver equipped with battery, the LED will not turn green to
show the full charge status. Only when the transceiver is off, can the LED indicate normally.
When the transceiver is powered on, it will consume energy and the charger cannot indicate if the battery
has been fully charged.
5.
Charging Process:
Status
Standby (self-examine orange lights
1second when power on)
Pre-charging (pre-charging stage)
Charging (charge in constant currency)
Full charged (charge in constant voltage)
6.
LED Indicator:
self-examine
STATUS
when power on
Orange
LED
(for 1 second)
NOTE: Trouble means battery heating, battery short-circuit or charger short-circuit.
(No battery) Pre-charging
Red light twinkles
Green
for 5 minutes
LED
Green light
Red light twinkles for about 5 minutes
RED light lightens for about 4 hours
Green light
Charge Full
normally Charged
Red Green
Trouble
Red twinkles
for a long time
07