Framing And Clearances; Selecting Appliance Location - Heat & Glo ST-36TRB-IPI Owner's Manual

5 5

Framing and Clearances

A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffi c and away from furniture and draperies.
36 in.
914 mm
36 in.
914 mm
36 in.
914 mm
Figure 5.1 Appliance Locations
Heat & Glo • ST-36TRB-IPI, PIER-36TRB-IPI, LCOR-36TRB-IPI, RCOR-36TRB-IPI • 2128-900 Rev. R • 12/15
36 in.
914 mm
PIER
36 in.
914 mm
ST
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
NOTICE: This See-Through appliance is NOT designed
or approved for an indoor/outdoor application.
36 in.
LCOR
914 mm
36 in.
914 mm
36 in.
914 mm
36 in.
914 mm
RCOR
19