Pride Air Owner's Manual page 11

Power Chair Securement Points
The power chair is equipped with four (4) tie-down
points for the purpose of securing the unoccupied
power chair during motor vehicle transport. Each tie-
down point is clearly labeled for this purpose.
To secure a power chair equipped with tie-down
points:
Always secure the power chair in a forward-facing
position in the vehicle.
 Attach the four tie-down straps to only designated,
labeled transit securement points indicated by
anchor symbols on the power chair. See fi gures
6 and 7. Tighten the straps to suffi ciently remove
all slack.
 Never attach tie-downs to adjustable, moving,
or removable parts of the power chair such as
armrests, front riggings, and wheels.
 Position the anchor points for the rear tie-down
straps directly behind the rear securement points
on the power chair. The front tie-down straps
should be anchored to fl oor points that are spaced
wider than the power chair to provide increased
stability. See fi gure 7.
MANDATORY!
should be used as indicated in the
manufacturer's instructions. If you
have any questions about the proper
use of your power chair, contact your
authorized Pride Provider.
Figure 6. Transit Securement Brackets
Jazzy Air
I I I . Y O U R P O W E R C H A I R
The power chair
www.pridemobility.com
FRONT OF VEHICLE
Figure 7. Unoccupied Transit System Securement Points
11