Wifi Hotspot - Philips HDP1650TV User Manual

Using WPS with Push Button
Configuration (PBC)
1 Switch the device on using the on/off key.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Settings .
4 Confirm with OK .
5 Using ¡/¢ select Wireless and Networks .
6 Confirm with OK .
7 Using ¡/¢ select WIFI Selection .
8 Confirm with OK .
9 Use ¡/¢ to select the desired wireless net-
work..
10 Confirm with OK .
11 Activate Push Button Configuration on the WLAN
access point. The WLAN access point and device
connect automatically and create a WPA protected
connection.
24

Wifi Hotspot

Notice
Important!
The projector can work as an access point, if
only a wired lan network is installed in the
location of use.
Use the portable Wi-Fi hotspot to share the device's
network connection with computers or other devices
through the Wi-Fi network.
Notice
Connection!
When the WiFi hotspot mode is activated, it
takes priority over the other connections.
Activating WiFi hotspot
1 Switch the device on using the on/off key.
2 After the initial screen, the main menu appears.
3 Use the navigation keys to select Settings .
4 Confirm with OK .
5 Using ¡/¢ select Wireless and Networks .
6 Confirm with OK .
7 Using ¡/¢ select WiFi Hotspot .
8 Confirm with OK .
9 Using ¡/¢ select Portable WiFi Hotspot .
10 Confirm with OK .
11 Using ¡/¢ select On .
12 Confirm with OK .
The projector is now visible by other Wifi devices.
Philips · HDP16x0TV