Service; Cleaning; Device Overheated; Update Firmware With Memory Card - Philips HDP1650TV User Manual

12 Service

Cleaning

DANGER!
Instructions for Cleaning!
Use a soft, lint-free cloth. Never use liquid or
easily flammable cleansers (sprays, abrasives,
polishes, alcohol, etc.). Do not allow any
moisture to reach the interior of the device.
Do not spray the device with any cleaning flu-
ids.
Wipe over the surfaces gently. Be careful that
you do not scratch the surfaces.
Cleaning the Lens
Use a brush or lens cleaning paper for cleaning the lens
of the projector.
DANGER!
Do not use any Liquid Cleaning Agents
Do not use any liquid cleaning agents for
cleaning the lens, to avoid damaging the coat-
ing film on the lens.

Device Overheated

A overheat symbol appears if the device is overheated.
Update Firmware with
Memory Card
1 Use SD memory card in the file system FAT16 or
FAT32.
All Data will be Deleted!
This procedure erases all your data that is
stored on the memory card.
2 Save the latest firmware update file to the root of
the memory card.
3 Insert the memory card (see Inserting a Memory
Card, page 21) and switch the device on.
4 Use the navigation keys to select Settings .
5 Confirm with à .
6 Use ¡/¢ to select Maintenance .
7 Confirm with à .
8 Use ¡/¢ to select Firmware Update .
9 Confirm with à .
10 Use ¡/¢ to select Install .
11 Confirm with à .
38
DANGER!
12 The device turns off and on again. After around 5
minutes the Language Selection screen appears.
The firmware update is now completed.
Inserting a Memory Card!
Never pull out the memory card while the
device is accessing it. This could cause data
to be damaged or lost.
Notice
If an error occurs during the firmware update
process retry the procedure or contact your
dealer.
DANGER!
Philips · HDP16x0TV