Initial Installation - Philips HDP1650TV User Manual

Initial Installation

1 To turn on the projector, push the POWER B but-
ton once.
2 Turn the device towards a suitable projection sur-
face or wall. Note that the distance to the projec-
tion surface must be a minimum of 0.1 meter and a
maximum of 0.5 meter (see Setting up the Device,
page 4). Make sure the projector is in a secure posi-
tion.
3 Use the focus wheel on the font of the device to
adjust the image sharpness.
4 The first time you turn on the device, you should
set the following settings.
Notice
During the first installation, use OK key to
validate your choice and continue to the next
step, and the ¿ key to return on the previ-
ous step.
5 Use the keys ¡/¢ to select the language and
confirm with OK.
6 Use the keys ¡/¢/À/Á to select the symbol
+ or - to set the date (day, month and year) and
confirm with OK .
7 Use the keys ¡/¢ to select the date format and
confirm with OK .
8 Use the keys ¡/¢ to select the time zone and
confirm with OK .
9 Use the keys ¡/¢/À/Á to select the symbol
+ or - to set the date (hour and minute) and con-
firm with OK .
10 Use the keys ¡/¢ to select the time format (12h
or 24h) and confirm with OK.
11 Use the keys ¡/¢ to select the location (Home
or Shop) and confirm with OK .
Home: for normal use.
Shop: when you choose this option, the projector
starts in demonstration mode. In this mode, the
projector automatically displays the pictures or vid-
eos stored in the internal memory in loop.
Notice
The demonstration mode can be activated or
deactivated on the menu Setting/Mainte-
nance/Demo mode.
12 A message is displayed «Open User Manual?»,
use the keys À/Á for select Yes or No. Press
OK to continue.
The manual is displayed or the address web site
where the user manual can be downloaded.
Turning off the projector
Press the B button on the panel control of the device
or on the remote control more than 5 seconds.
Initial Operation
ECO mode
Press shortly the B button on the panel control or on
the remote control to put the device in ECO mode.
To wake up the device, press shortly again on the
B button.
Setting up the Language
The device has already been installed. In order to
change the menu language, proceed as follows:
1 Use the navigation keys to select Settings.
2 Confirm with OK .
3 Select Language/ Language with ¡/¢ .
4 Confirm with OK .
5 Select Menu Language with ¡/¢ .
6 Confirm with OK .
7 Select you desired language with ¡/¢ .
8 Confirm with OK .
9 Exit with u .
15