Setting Up A Wireless Network (Wlan) Using; The Wizard; Wifi Hotspot - Philips Screeneo HDP1550 User Manual

Using WPS with Push Button
Configuration (PBC)
1 Switch the device on using the on/off key.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Settings.
4 Confirm with OK.
5 Using ¡/¢ select Wireless and Networks.
6 Confirm with OK.
7 Using ¡/¢ select WIFI Selection.
8 Confirm with OK.
9 Use ¡/¢ to select the desired wireless network..
10 Confirm with OK.
11 Activate Push Button Configuration on the WLAN
access point. The WLAN access point and device
connect automatically and create a WPA protected
connection.
Network

Wifi Hotspot

Notice
Important!
The projector can work as an access point, if
only a wired lan network is installed in the
location of use.
Use the portable Wi-Fi hotspot to share the device's
network connection with computers or other devices
through the Wi-Fi network.
Notice
Connection!
When the WiFi hotspot mode is activated, it
takes priority over the other connections.
Activating WiFi hotspot
1 Switch the device on using the on/off key.
2 After the initial screen, the main menu appears.
3 Use the navigation keys to select Settings.
4 Confirm with OK.
5 Using ¡/¢ select Wireless and Networks.
6 Confirm with OK.
7 Using ¡/¢ select WiFi Hotspot.
8 Confirm with OK.
9 Using ¡/¢ select Portable WiFi Hotspot.
10 Confirm with OK.
11 Using ¡/¢ select On.
12 Confirm with OK.
The projector is now visible by other Wifi devices.
19