Initial Installation - Philips Screeneo HDP2510 User Manual

Initial installation

1 Turn the device with the rear side towards a
suitable projection surface or wall. Note that
the distance to the projection surface must
be a minimum of 0.1 meter and a maximum of
0.42 meter (see Setting up the device,
page 4). Make sure the projector is in a secure
position.
Notice
Das Ein- und Ausschalten des Gerätes
nimmt einige Zeit in Anspruch, da die
UHP Lampe Betriebstemperatur erre-
ichen muss. Die volle Helligkeit ist nach
einigen Minuten erreicht.
Turning on the projector
1 To turn on the projector, press once the
B button on the panel control of the device
or on the remote control.
2 Use the FOCUS buttons (+/-) to adjust the
image sharpness.
14
3 The first time you turn on the device, you
need to set the following settings.
Notice
During the first installation, use OK key
to validate your choice and continue to
the next step, and the ¿ key to return
on the previous step.
4 Use the keys ¡/¢ to select the language
and confirm with OK.
Language
Please choose your Language
Český
Dansk
Deutsch
English
Español
Francais
Italiano
5 Use the keys ¡/¢ to select the location and
confirm with OK.
Location
Please choose the location where your Screeneo
should be placed
Shop
Home
Home: For normal use.
Shop: When you choose this option, the pro-
jector starts in shop mode. In this mode
default setting are made and can't be
changed.
Notice
The shop mode can be activated or
deactivated on the Option menu (see
Shop Mode Switches the shop mode
On and Off., page 27).
OK
OK
Philips · HDP2510