Decopic - Docomo F-03D Instruction Manual

DecoPic

･
Taken still images are saved to a microSD card. Attach a
microSD card to the terminal before shooting.→P25
1
From the Applications menu, [DecoPic]
2
[Shoot]
Editing : [Edit]→Select a still image to edit
Checking saved pictures :
Using DecoPic diary :
3
Tap items following the onscreen
instructions→[Shoot]
The shooting screen is displayed.
4
Count down sound sounds and shutter sound sounds
in approximately 3 seconds, then a still image is shot.
Turning on/off light :
･
You can operate only when Out-camera is set.
5
Check the shot still image→[Graffiti]
Shooting again : [Reshoot]
Saving shooting mode :
･
Appears only when [Set manually] is selected in the
shooting mode.
6
Edit a still image→[Completed]→[Yes]
7
[Share]/[Register]/[Newly shoot]/[View
saved image]/[Exit]→[OK]
･
When you select [Share], select a sending method.
･
When you select [Register], select [Phonebook]/
[Wallpaper].
[List]
[DecoPic diary]
[Save shooting mode]
■ Palette operations for editing still image
Draw a picture on a still image or put stamps on the
DecoPic editing screen.
･
Select an editing tool and draw on the editing screen.
(Pen) : Draw letters or pictures.
(Stamp) : Paste stamps.
(Rolling) : Drag to paste continuous pattern.
(Text) : Paste entered letters.
(Eraser) : Erase drawn letters or pasted stamps.
(Make-up) : Put makeup on person's face or make face
correction or shot effect.
: Paste a still image as a stamp.
: Go back to the previous state.
: Scroll the screen.
･
Available when entire view is larger than the screen.
: Change zoom ratio. Images are displayed to fit the
screen width when [Just right size] is selected.
･
On the stamp or text pasting screen, the following
operations are available.
: Zoom out/in
: Highlight stamps or entered text
: Rotate stamps or entered text
103
Applications