Olympus DP71 Instructions Manual page 5

Computer and Software
The computer data may be destroyed by an unexpected event. Be sure to keep the backup of the data.
1. Olympus will not assume any liabilities for any damage incurred due to the use or non-usability of this system, including
compensation for the lost data.
2. The computer used with this system should set up and run Microsoft Windows 2000 or XP.
For the OS in the computer, the user is requested to create a backup and retain it carefully. (Olympus does not support the
matters related to the OS including its backup.)
For details on the computer and Microscope Windows 2000 or XP, refer to their respective manuals.
3. Olympus guarantees the quality of this product in the factory shipment condition.
Olympus will not assume any liabilities for the operation errors and functional faults incurred due to the alteration of the
environmental setup (including BIOS change), installation of other software or addition of hardware to the computer by the
user.
4. When the HD free space reduces, the data processing speed may slow extremely or errors may occur frequently. To
prevent this, delete unnecessary data files frequently. For how to delete data files, refer to the manuals for Microsoft
Windows 2000 or XP.
5. Never attempt to delete or rename the folders and files recorded in the provided installer software. Otherwise, the software
may get unable to be started up.
6. Do not open the enclosure of the computer and touch the power supply or the circuit board's heat generating section
right after use as it may burn your hand. Wait until the internal temperature drops sufficiently.
7. Sharp edges inside the computer may cut your fingers, so take extra care.
8. Use a computer that complies with the safety standards of your country.
DP71
2