Kyocera FS-1028MFP Service Manual page 65

Maintenance
item No.
Adjusting margins of image printing
U402
Description
Adjusts margins for image printing.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.
Display
LEAD
A Margin
C Margin
TRAIL
3. Press the system menu/counter key.
4. Press the start key to output a test pattern.
5. Press the system menu/counter key.
6. Change the setting value using the cursor left/right keys or numeric keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U402
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Printer leading edge margin
Printer left margin
Printer right margin
Printer trailing edge margin
Printer
left margin
(2.0+2.0/-1.5 mm)
Printer trailing edge margin
(3.0±2.5 mm)
U403 U404
(P.1-3-40) (P.1-3-41)
Description
Setting
range
0 to 100
0 to 100
0 to 100
0 to 100
Printer leading edge margin
(3.0±2.5 mm)
Printer
right margin
(2.0+2.0/-1.5 mm)
Figure 1-3-14
2H9-1
Initial Change in
setting value per step
30 0.1 mm
25 0.1 mm
25 0.1 mm
30 0.1 mm
1-3-39