Kyocera FS-1028MFP Service Manual page 53

Maintenance
item No.
Method: 256-Level
U089
1. Select [256-Level] using the cursor up/down keys and press the start key.
2. Select [HTFM1], [HTFM2], [Dither1] or [Dither2] using the cursor up/down keys and press the start key.
3. Select [ON] or [OFF] using the cursor up/down keys and press the start key.
4. Press the system menu/counter key.
5. Press the start key. A MIP-PG pattern is output.
6. To return to the screen for selecting an item, press the system menu/counter key.
Method: 1 dot-Level
1. Select [1 dot-Level] using the cursor up/down keys and press the start key.
2. Change the value using the cursor left/right keys or numeric keys and press the start key.
Description
Dot pattern
3. Press the system menu/counter key.
4. Press the start key. A MIP-PG pattern is output.
5. To return to the screen for selecting an item, press the system menu/counter key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Setting range
0 to 15
2H9-1
Initial setting
0
1-3-27