Advertisement
Monogram.
™
ZICS36NA–GE Monogram 36" Built-In Stainless Steel Bottom Mount
Refrigerator with Automatic Icemaker
Design Information
Installation Between Base & Wall Cabinets
Installation at End of Run
Frameless Cabinets
Side panels, 1/2" minimum thickness are required when using
frameless cabinets. The side panel acts as a spacer between
the cabinet and the case trim and prevents interference with
cabinet door swing. The leading (front) edge must be finished
to match surrounding cabinetry.
Specification Revised 6/00
1/4" Thick
Side Panels
Finished Dim.
35-1/2"
Roughed-In Dim.
36"
Note: 1/4" thick side panels can be
inserted into the case trim, making
the rough-in the same as the outside
trim width, 36".
1/2" Thick
Side Panels
36"
Finished Dim.
Roughed-In Dim.
37"
Note: 1/2" thick side panels shown.
Side panels can be any thickness.
Add side panel thickness to outside
trim width (36")to calculate the
rough-in dimension. The leading
(front) edge must be finished to match
surrounding cabinetry.
Refrigerator
Cabinet
Refrigerator door
Cabinet
1/4" Side Panels. Insert end of side panel
into trim.
Refrigerator
Cabinet
Refrigerator door
Cabinet
1/2" To 3/4" Side Panels. Leading Edge Flush
With Cabinet.
Refrigerator
Cabinet
Refrigerator door
1/2" To 3/4" Side Panels. Leading Edge Flush
With Cabinet.
For answers to your Monogram,
GE Profile Performance Series,
GE Profile
™
or GE appliance questions, call
GE Answer Center
®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
R
®
™
Advertisement
