Setting The White Balance; Interval Movie Record - Ricoh Pentax K-3 Operating Manual

Interval Movie Record

In C mode, you can use [Interval Movie Record] to take still
pictures at a set interval from a set time and save them as a
single movie file (Motion JPEG, file extension: .AVI).
1
Turn the Stills/Movie switch to C and press A.
The Drive Mode screen appears.
2
3
Select Y and press B.
3
Set the shooting
conditions.
Recorded Select from z, u, or t.
Pixels
Select from 2 sec., 5 sec., 10 sec., 20 sec., 30
Interval
sec., 1min., 5 min., 10 min., 30 min., or 1 hour.
Set the time from the start to the end of recording.
Recording
Select from 14 seconds to 99 hours. The time that
Time
can be set varies depending on the [Interval] setting.
Select whether to take the first picture now or
Start
at a set time.
When [Set Time] is selected, set the time at
Interval
which to start shooting in [Start Time].
4
Press E to finish the setting.
The camera returns to standby mode.
5
Press the shutter release button to start
shooting.
When [Start Interval] is set to [Now], the first picture is taken.
Instant Review is displayed, and then the monitor turns off.
After the set number of pictures are taken, the camera
returns to standby mode.
t Memo
• The shortest interval time that can be set for [Interval] is 10
seconds for [Digital Filter] and 20 seconds for [HDR Capture].
52
1
2
Interval Movie Record Interval Movie Record
Recorded Pixels Recorded Pixels
Interval Interval 2sec. 2sec.
Recording Time Recording Time
00 : 00 ' 14" 00 : 00 ' 14"
Start Interval Start Interval Now Now
Cancel Cancel OK OK

Setting the White Balance

Press C in standby mode.
The White Balance setting screen appears.
Select the White Balance.
g Auto White Balance
g
u Multi Auto White Balance
h Daylight
i Shade
j Cloudy
q Fluorescent - Daylight Color
r Fluorescent - Daylight White
k
s Fluorescent - Cool White
t Fluorescent - Warm White
l Tungsten
m Flash
n Color Temperature Enhancement
o Manual White Balance 1 to 3
p Color Temperature 1 to 3
Available operations when shooting with the
viewfinder
Main switch to U Uses Digital Preview to preview
the background image with the
white balance effect applied.
H Saves the preview image (only
when the data is available).
Proceed to Step 5 if you do not need to change the
parameters.
Y
Auto White Balance Auto White Balance
Check Check
Cancel Cancel OK OK
WB± WB±