Leveling The Ice Storage Bin - Manitowoc QR0320A Service Manual

Installation Instructions

Leveling the Ice Storage Bin

1. Screw the leveling legs onto the bottom of the bin.
2. Screw the foot of each leg in as far as possible.
The legs must be screwed in tightly to prevent them
from bending.
3. Move the bin into its final position.
4. Level the bin to assure that the bin door closes and
seals properly. Use a level on top of the bin. Turn
each foot as necessary to level the bin.
NOTE: An optional caster assembly is available for use
in place of the legs. Installation instructions are supplied
with the casters.
Figure 2-1. Leveling Leg and Foot
2-6
! Caution
THREAD LEVELING
LEG INTO BASE OF
CABINET
THREAD 'FOOT' IN AS
FAR AS POSSIBLE
Air-Cooled Baffle
The air-cooled baffle prevents condenser air from
recirculating. To install:
1. Remove the back panel screws next to the
condenser.
2. Align the mounting holes in the air baffle with the
screw holes and reinstall the screws.
SV1606
Figure 2-2. Air Baffle
Part No. 80-1100-3
Section 2
AIR
BAFFLE
SCREWS
SV1607