Table of Contents
Advertisement
M
ONACO
2000
ator light will flash. Fault alarm is a short beep tone, once every 45 seconds, and is dis-
tinctively different from the alarm sound.
Testing LP Gas Detector
The detector must be operating for at least 3 minutes before it can be tested.
Expose detector to gas and observe that alert alarm will begin to sound. One method of
simulating gas is to use a butane lighter. DO NOT ROTATE flint wheel. Just press on
gas release button and point exit nozzle into gas sensing area near top left of detector.
Alert will continue to sound until:
6 Gas mixture at detector returns to a safe level.
6 Reset button is pressed. When reset button is pressed, detector cannot be
tested again for at least 3 minutes.
5-6
LP
LP
NOTES
Monarch
Gas Systems
Gas Systems
Hide quick links:
Advertisement
Table of Contents
