Printing Using Lpd - Motorola WPS870G User Manual

WPS870G
Where:
Printer_name is the Print Queue name used to store jobs for the corresponding logical
printer.
PS_NAME is the Wireless Print Server name defined in /etc/hosts.
Logical_Printer_name is the logical printer name on the Wireless Print Server (for
example, L1).
Spooler_directory is the directory created.
Example:
Marketing|RP1_PS123456:\
[T ] :lp=:\
AB
[T ] :rm=PS_Rm203:\
AB
[T ] :rp=L1:\
AB
[T ] :sd=/usr/spool/Marketing:\
AB
[T ] :mx#0:
AB
Repeat this process for each Logical Printer/Print Queue combination that you wish to
create.

Printing using LPD

For LPD printing instructions, refer to your UNIX manual. The following example is for a
BSD system:
lpr -P printer_name filename
Where:
printer_name is the name of the Print Queue defined on the Unix host.
filename is the name of the file you wish to print.
Example:
lpr -P Marketing /etc/hosts
In the above example, the /etc/hosts file is sent to the printer queue Marketing. It will then
be sent to the logical printer associated with this queue.
User Guide
PAGE 92