Motorola Wireless Print Server WPS870G Getting Started

Ethernet Cable
CD-ROM
WPS870G
Reset
Power Parallel USB LAN
WPS870G
Power Parallel
or
Parallel or USB Printer
If you need assistance, call 1-877-466-8646, seven days a week, 24 hours a day. Y ou can also check for the
latest developments at: www.motorola.com/broadband/consumers
MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office.
512706-001
Power Supply
LAN
Wire less
USB
Para llel
WPS870G
WR850G
or
Wireless Router
OR
Reset
USB LAN
WR850G
or
Wireless Router
Motorola WPS870G
Wireless Print Server

Getting Started

1
Confirm that your box contains these items.
Before you begin, we recommend:
Installing the printer drivers for the printers
you intend to use, if not already installed.
Collecting the Network Name (SSID) and
wireless security settings (like WEP or WPA)
for your wireless network.
If you are running Windows XP, you may
need to disable your built-in firewall for the
installation process, see User Guide
(Troubleshooting) for instructions.
2
Connect your Print Server as shown.
(See Section 2 of the User Guide
for more information)
First: Connect the Ethernet cable to the
router and then to the Print Server.
Second: Connect the power cable to an
outlet and then to the Print Server.
3
Insert the Installation Wizard CD-ROM.
Begin the installation by clicking the
first step.
(See Section 2 of the User Guide for
more information)
4
Wirelessly connect your Print Server to your
router or wireless access point, when
prompted.
(See Section 2 of the User Guide
for more information)
First: Unplug the Ethernet cable from the
router and the Print Server. Then,
unplug the power cable from the
Print Server.
Second: Plug in the power cable for the Print
Server. The Print Server will now
wirelessly associate with your router
or wireless access point.
Complete the instructions provided by the
Installation Wizard.
MGBI