Starting Ndps; Creating An Ndps Printer Agent - Motorola WPS870G User Manual

WPS870G
Browse the Database Volume and select where you want the NDPS Manager database
7
to be assigned (for example, TECH_50_SYS.TeSupp in the window above).
Click Create. The new NDPS Manager will appear in the main browser window.
8

Starting NDPS

To start the NDPS Manager, enter the following command at the console:
LOAD NDPSM
then select the NDPS Manager object.
To start the NDPS Manager whenever you bring up the server, add a command similar
to the following to your server's AUTOEXEC.NCF file:
LOAD NDPSM
The last item is the name of the NDPS Manager object you want to load.
After creating an NDPS Manager, you can create NDPS printers by using NetWare
Administrator, as explained below.

Creating an NDPS Printer Agent

To create Public Access Printers using the NDPS Manager Object in NetWare
Administrator, follow this procedure:
Start the NDPS Manager object you will be using to control the Printer Agent.
1
At the Identification page, click the Printer Agent List.
2
Click New to display the Create Printer Agent window:
3
Enter the desired name for the Printer Agent (PA) Name. Normally, the NDPS Manager
4
will be the NDPS Manger object you are using.
Select Novell Printer Gateway in the Gateway Type (see above).
5
Click OK and then select the available printer.
6
SerMGR.TeSupp
User Guide
PAGE 94