Motorola WPS870G User Manual page 28

User Guide
The Add Printer Wizard window is displayed:
Select the newly added Port. Look for the description of "PrintServer" because your
6
installation will vary. In the example above, P2 represents the second Port (USB) on the
WPS870G. Once selected, click Next.
Keep or replace the driver as needed and click Next. The Name Your Printer window is
7
displayed. Motorola recommends changing the Printer name to indicate that this printer
is attached to your Wireless Print Server.
Click Next and the Printer Sharing window is displayed.
8
Click "Do not share this printer" and click Next.
9
10 Click Yes or No to print a Test Page and click Next.
11 Click Finish to complete the Print Utility setup. Your Wireless Print Server is now ready
to be used. To print from an application, select the printer you have just configured from
the Print dialog box of the application.
12 If the Printer Port Setup window is still open, you can set up another printer or click
Close to exit the window.
After you have finished the initial installation setup program on the CD-ROM, your
WPS870G is up and running and ready for advanced wireless configuration. See
Wireless Security Configuration
Section 4: Web-Based Management
PAGE 21
for configuring the strongest security settings and
for configuring the WPS870G.
WPS870G
Section 3: