Connecting To The Wps870G - Motorola WPS870G User Manual

WPS870G

Connecting to the WPS870G

The screenshots seen here are intended for reference only; your version of firmware may differ slightly.
Your WPS870G must have received an IP address for you to connect to it, either by
manually assigning it or by being assigned an IP address by your router.
Start your Web browser.
1
In the URL field, enter http:// followed by the IP address of the WPS870G, for example:
2
192.168.10.3. This is the IP address you assigned during installation. If this is the first
time you are logging into the device, it is recommended that you bookmark the address
for easy retrieval.
Type the password. The default password is "motorola."
3
Press E or click LOG IN. The default login page is displayed:
NTER
4
Use the menu bar at left to navigate major sections. Use the tabs across the top to open
different sub-sections of the major section selected.
User Guide
PAGE 36