Updating Firmware - Motorola WPS870G User Manual

WPS870G

Updating Firmware

The Firmware Update window allows you to update your Print Server's firmware (the
mechanism that controls your Print Server's hardware). Click Login Settings > Firmware
Update to access the Firmware Update window.
To check for a firmware update, access this website
New firmware can be found under the "Support and Downloads" link.
To update the firmware:
Download the latest firmware file to your computer from the Motorola website. Note the
1
location where you downloaded the file.
Click Control Panel > Firmware Update to access the Firmware Update window:
2
To locate the file you downloaded, type the path to the file or click Browse and navigate
3
to it.
Click Update to update the router with the selected firmware file. A dialog box is
4
displayed asking to continue.
Click OK to continue. When the firmware upgrade completes, a dialog box appears:
5
Check that the LAN or Wireless LED is illuminated on your WPS870G and click OK.
Log back on to the WPS870G by entering the WPS870G's IP address.
If you encounter trouble restarting the unit, press the Restore button for 5 seconds to
reset it to its default settings. See
www.motorola.com/broadband/networking
Test Print and Restore Button
User Guide
for further details.
PAGE 50
.