Windows Printing Solutions; The Installation Wizard Cannot Detect My Print Server In Windows Xp - Motorola WPS870G User Manual

WPS870G

Windows Printing Solutions

The Installation Wizard cannot detect my Print Server in Windows XP.

You may need to disable your built-in firewall in Windows XP.
You must be logged on to your computer with an
enable/disable the firewall. Follow the directions here:
http://www.microsoft.com/windowsxp/home/using/howto/homenet/icf.asp
I cannot print in Windows XP.
You may need to disable your built-in firewall in Windows XP.
You must be logged on to your computer with an
enable/disable the firewall. Follow the directions here:
http://www.microsoft.com/windowsxp/home/using/howto/homenet/icf.asp
It is suggested you use another firewall solution in this scenario, either with a hardware
firewall or software firewall.
When I tried to install the Printing software for Peer-to-Peer printing, I received an error
message and the installation aborted.
This may be caused by an existing installation of the printer port software. Before
attempting another installation:
Remove the existing installation
Restart your computer
To remove an existing printer port installation:
Click Start > Settings > Control Panel > Add/Remove Programs.
1
Look for an entry with a name like "Shared Port", "Shared Printer Port", "Print Server
2
Utility" or "Print Server Port".
Select this item, click Add/Remove, and confirm the deletion.
3
On Windows 98, I installed the Print Port Driver for Peer-to-Peer Printing, but when I
selected a port on a Wireless Print Server and clicked "Add", the printer was not installed.
Try installing the Printer using the standard Windows tools, as follows:
Start the Add Printer Wizard by selecting Start > Settings > Printers > Add Printer.
1
Select Network Printer when prompted, "How is the printer attached to your
2
Computer?" and click Next.
administrator account
administrator account
User Guide
in order to
in order to
PAGE 74