CLEARANCE TO COMBUSTIBLES
This appliance must be installed in a recess, the
recess should not contain any combustible materi-
als. Wooden battens and plaster board should not
be used within the clearance to combustibles. The
minimum clearance to combustibles required is
200mm to the top, 150mm to the sides, 550mm
directly to the front and 350mm to any combustible
flooring.
FLOOR PROTECTION
This appliance must be installed on a solid, level,
concrete base, a non combustible hearth conform-
ing to current Building Regulations must extend to
the front of the appliance.
Fig 13
Fig 14
9