Motorola SB5100 Series User Manual page 59

Introduction Before You Begin
Home Print
Installation & Configuration
Removing the USB Driver from Windows 2000, continued
19
The window on the left is displayed. Be sure the USB cable is disconnected.
20
Click Remove Driver.
Informational messages similar to the ones shown at left are displayed on the
SURFboard Cable Modem USB Driver Removal window.
After you remove the USB driver, re-install the USB driver following
Driver in Windows 2000"
cable service provider.
X
Exit
Troubleshooting
on page 16. If you continue to have problems, contact your
53
SB5100 Series Cable Modem User Guide
FAQ Glossary License
"Setting Up a USB