Page 1
USER’S MANUAL Part 2 Big Button Plus 905 Fold open this manual for information about this telephone’s installation and operation. Please also read Part 1 — Important Product Information. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
NOTE: This telephone requires a modular telephone jack. Table If you have a wall-mounted telephone, remove the telephone from the wall and follow these instructions: 1 Remove the base. 2 Connect line cord to telephone. Plug the line cord into the jack labeled TEL LINE on the back of the phone.
TELEPHONE OPERATION One-touch memory dialing numbers Directory Card/Cover Temporary Tone Ringer Volume Access Call Waiting or other services Program numbers Redials last call made into memory Accesses speed dial memory numbers Handset Volume Controls...
Page 4
Volume Button The VOLUME button adjusts the handset during your call. When on a call, press to increase volume, to decrease volume. Redial The telephone stores in memory the last number you called. The number (up to 24 digits) will remain in the Redial memory until you dial another number.
Page 5
Memory Features Capacity: The Big Button Plus 905 telephone can store 12 different telephone numbers, each up to 24 digits long. One-Touch Dialing: Three numbers can be stored in one-touch memory locations. You can dial these numbers by pressing one of the buttons marked with an emergency symbol.
If this telephone does not work properly, try the following suggestions before seeking repair assistance. No Dial Tone • Make sure all plugs are connected properly. Inspect the line cord connections at the modular jack and at the telephone. Also inspect the coiled handset cord connection at both ends.