AT&T 902 User Manual

Two-line speakerphone

Hide thumbs

page of 6

/ 6
Bookmarks

Quick Links

Download this manual

User's Manual for the

Two-Line Speakerphone 902

Fold open this manual for information about

this telephone's installation and operation.

Please read Part 1 — Important Product

Information, included in this package.

• Try calling the number you want

to enter into memory. When the

call is ended, press

and a memory button.

• If someone lifts an extension

phone while you are storing num-

bers in memory, programming

might be interrupted. Make sure

all extensions are on hook while

storing numbers in memory.

• You might not hear the confirma-

tion beep if the RECEIVER

(handset) volume is set too low, or

if you are in a noisy location.

• If the number is more than 24

digits long, make sure you follow

the directions for "Dialing Long

Numbers."

• Do not put the phone on Hold

while storing numbers.

Printed in Mexico. 848236212 Issue 1AT&T

IN CASE OF DIFFICULT Y

Problems With Line Status Lights

• Make sure all plugs are connected

properly. Inspect the line cord

connections at the modular jack

and at the telephone. Also inspect

the coiled handset cord connections

at both ends.

• Try replacing old bat t e ries. See

" B at t e ri e s " in the Installation section.

• Make sure the batteries are

correctly installed, and that the

battery contact surfaces and

battery case are clean.

• If only one telephone line is

connected, make sure that only the

batteries for that line (as labeled

on the battery compartment) are

installed.

Part 2

Telephone Does Not Ring

• Make sure the RINGER switch

is set in the LO or HI position.

• If there are several other

telephones on the same line, try

disconnecting some of the other

telephones. Having too many

telephones connected can also

create problems such as low ringer

volume, or impaired sound quality

during calls.

Summary of Contents for AT&T 902

Page 1 User’s Manual for the Two-Line Speakerphone 902 Fold open this manual for information about this telephone’s installation and operation. Please read Part 1 — Important Product Information, included in this package. • Try calling the number you want to enter into memory. When the call is ended, press and a memory button.
Page 2 NOTE: This telephone requires a 2-line modular jack or two separate one-line modular jacks to use this unit as a two-line phone . NOTE: To use both lines of a two- line telephone, your local telephone company must provide two telephone numbers.
Page 3 Table 1 Remove the base. 2 Connect line cord(s) to telep h o n e. • If you have a two-line jack, use only the line cord with the clear modular plugs on each end. Plug one end into the jack labeled L1 OR L1/2 on the bottom of the telephone.
Page 4: Telephone Operation
Making a Call—Handset Press and then lift the handset. You can dial your call manually or use the memory dialing feature. Answering a Call—Handset Each line has a different ringer tone to signal an incoming call. One of the Line Status lights will flash to identify the ringing line.
Page 5: In Case Of Difficulty
Conference Call Options To place a conference call on Hold: 1. Press to hold both lines. 2. Press to release Hold and continue your conference call. To talk privately with one caller: 1. Press 2. Press the line button of the person with whom you want to speak privately.
Page 6 Memory Features Capacity: This telephone can store up to 16 telephone numbers, up to 24 digits long. One-Touch Dialing: The 16 spaces on the directory card are one-touch memory locations. You can dial one of these numbers by pressing the memory button next to the number.

AT&T 902 User Manual

Quick Links

Related Manuals for AT&T 902

Summary of Contents for AT&T 902

Page 4: Telephone Operation

Page 5: In Case Of Difficulty